EAST CHICAGO — Indiana Harbor Works in East Chicago remains vital to Cleveland-Cliffs even though the steel mill where 11 blast furnaces were built is down to just one, the CEO said.
Cleveland-Cliffs recently indefinitely idled blast furnace No. 4 on the west side of the mill that was previously owned by LTV, Youngstown Sheet and Tube and Mark Manufacturing. The only iron-producing blast furnace left on the steel mill on the Lake Michigan harbor is Blast Furnace No. 7 on the east side that was along the Inland Steel mill.
The company invested $100 million to reline Blast Furnace No. 7 late last year, setting it up for decades of productivity, Chairman, President and CEO Lourenco Goncalves said.
“We’re going to have it for the long run,” he said. “That’s the biggest and most efficient blast furnace in the western hemisphere.”
The blast furnace is now using more hot briquetted iron made in Toledo instead of coke, reducing its carbon footprint.
People are also reading…
“We are now in a position to use a lot of HBI in the blast furnace and iron ore pellets to reduce coke rate to a level that our emissions are the envy of the world,” Goncalves said. “It has the lowest coke rate in the footprint.”
Cleveland-Cliffs, the largest flat-rolled steel producer in North America, now operates seven blast furnaces, three of which are in Northwest Indiana.
Steel rolls along the line at the 80” Hot Strip Mill at Cleveland-Cliffs Indiana Harbor Works in East Chicago.
Indiana Harbor remains a key piece.
“We have the largest footprint, the biggest plant in the U.S. and North America,” he said. “We supply hot metal to not only all of our steelmaking operations in the Indiana Harbor complex, both the east and west sides, but also to Riverdale in Illinois. We send pig iron in rail cars on the railroad. Riverdale does high-carbon steels to a very specific niche market that’s extremely profitable. We have a lot of good-paying middle-class union jobs there as well. So it’s supremely important and a vital part of our strategy overall.”
The company plans to continue to invest in infrastructure and reliability at the steel mill in East Chicago. The Cleveland-based company has a total capital budget of $900 million this year, Goncalves said.
The sprawling mill has four basic oxygen furnaces, four continuous casting machines, an 80-inch hot-strip mill, a five-stand tandem mill, ladle metallurgy facilities, a recycling plant, a pickling line, a temper mill, a slab dimensioning facility, hot dip galvanizing lines and batch and continuous annealing lines.
The former Inland Steel mill on the east side at one time had seven blast furnaces, all named “Madeline” after Madeline Block, the daughter of Inland Steel Company co-founder Philip D. Block.
While there’s only one left running now, it’s newer and far more massive than the ones it replaced, Cleveland-Cliffs Indiana Harbor Works Environmental Manager Tom Barnett said.
“To put it in perspective, our very first blast furnace, Blast Furnace No. 1, could produce 1,000 tons a day,” he said. “No. 7 can make 14,000 tons a day. There are fewer blast furnaces left in the United States but all of them make more iron than we used to make.”
Traditionally, steel mills have operated more than one blast furnace as they tend to be maintenance-intensive, and sometimes have to be idled for weeks for capital projects to keep them up and running.
Indiana Harbor Works will no longer have a secondary backup blast furnace running in the event of a reline or other big maintenance project but can adjust in new ways, Barnett said.
“Burns Harbor has two blast furnaces that can make 7,000 tons apiece,” he said. “You overproduce, get slabs on the ground and get inventory. You run on that. The beauty of Cliffs now is if we’re short of slabs or roll we can get them from Middletown. We can get them from Dearborn. We can get them from Cleveland. We can get them from Burns Harbor. There’s a lot of flexibility now in this company.”
Gallery: Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland Cliffs CEO Lourenco Goncalves, left, and U.S. Rep. Frank Mrvan tour the 80” Hot Strip Mill on Monday afternoon at Cleveland-Cliffs Indiana Harbor in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Clifs CEO Lourenco Goncalves holds up a piece of hot briquetted iron (HBI) while talking about it as an alternative to imported pig iron Monday afternoon at Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Steel rolls along the line at the 80” Hot Strip Mill at Cleveland-Cliffs Indiana Harbor Works in East Chicago on Monday afternoon.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
U.S. Rep. Frank Mrvan, right, and Cleveland Cliffs CEO Lourenco Goncalves meet with local media Monday afternoon at Cleveland-Cliffs Indiana Harbor Works steel mill in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Cliffs CEO Lourenco Goncalves greets employees at the 80” Hot Strip Mill on Monday afternoon at Indiana Harbor Works.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Steel rolls along the line at the 80” Hot Strip Mill at Cleveland-Cliffs Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
U.S. Rep. Frank Mrvan, left, and Cleveland-Cliffs CEO Lourenco Goncalves tour the 80” Hot Strip Mill on Monday afternoon.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
U.S. Rep. Frank Mrvan, right, and Cleveland Cliffs CEO Lourenco Goncalves tour the 80” Hot Strip Mill on Monday afternoon at Cleveland-Cliffs Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Steel rolls along the line at the 80” Hot Strip Mill at Cleveland-Cliffs Indiana Harbor Works in East Chicago on Monday afternoon.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Hot steel rolls along the line of the 80” Hot Strip Mill on Monday afternoon at Cleveland-Cliffs Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Employees at the 80” Hot Strip Mill at Cleveland-Cliffs Indiana Harbor Works meet with CEO Lourenco Goncalves and U.S. Rep. Frank Mrvan on Monday afternoon.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Steel coils sit in the yard Monday afternoon at Cleveland-Cliffs Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
U.S. Rep. Frank Mrvan answers questions Monday afternoon at Cleveland-Cliffs Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Cliffs CEO Lourenco Goncalves, left, talks about hot briquetted iron (HBI) as an alternative to imported pig iron in steelmaking Monday afternoon at Indiana Harbor Works in East Chicago before a tour with U.S. Rep. Frank Mrvan.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Cliffs CEO Lourenco Goncalves, left, talks with U.S. Rep. Frank Mrvan before a tour of the 80” Hot Strip Mill on Monday afternoon at Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Cliffs EO Lourenco Goncalves talks about hot briquetted iron (HBI) compared to imported pig iron in steel making Monday afternoon at Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
U.S. Rep. Frank Mrvan, right, and Cleveland-Cliffs CEO Lourenco Goncalves meet with local media Monday afternoon at Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
U.S. Rep. Frank Mrvan, right, listens as Cleveland-Cliffs CEO Lourenco Goncalves talks Monday afternoon at Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Cliffs CEO Lourenco Goncalves walks into the 80” Hot Strip Mill on Monday afternoon at Indiana Harbor Works in East Chicago.
Cleveland-Cliffs CEO, Mrvan tour Indiana Harbor Works steel mill
Cleveland-Cliffs CEO Lourenco Goncalves, left, talks with U.S. Rep. Frank Mrvan before a tour of the 80” Hot Strip Mill on Monday afternoon at Indiana Harbor Works in East Chicago.
Get the latest local business news delivered FREE to your inbox weekly.
